Thank you for purchasing our product. We really mean it. We hope to earn your trust by delivering a quality
product that inspires you to make great music.
Neunaber products are designed and manufactured in Orange, California USA.
CONNECTIONS
We recommend that this pedal be placed at the end of your chain, after all other effects except reverb. If you
are using the overdrive channel of your amplifier, this effect should be placed in the effects loop for best results.
POWER
The power jack accepts a standard (5.5 mm OD x 2.1 mm ID) center-negative pedal power adapter (not
included). The power adapter must be between 9 V and 12 V and capable of supplying 100 mA or more.
INPUT
The input jack (top right) accepts input directly from your instrument, amplifier effects loop output, or other
effect pedals via a standard 1/4” (6.35 mm) phone connector.
OUTPUT
The output jack (top left) supplies output to another effect pedal, an amplifier, or effects loop return via a
standard 1/4” (6.35 mm) phone connector. The buffered output is capable of driving long cables. If plugging
into the input of an amp, you should use the low impedance (Lo-Z) input if available.
FOOTSWITCH
The Engage switch selects between engaged and bypassed. The LED lights when the effect is active.
Bypassing the effect does not lower power consumption, because it does not turn off power to the pedal.
Press and hold the footswitch for 1 second to enter and exit Tap Tempo mode. Release when the LED
illuminates red.
While in Tap Tempo mode, you may engage/bypass by pressing the footswitch once and waiting 1 second.
