KH 150 AES67 |
34
The audio will start playing .
The table in the center of the page will show the routed audio .
To remove a connection:
X
Open the loudspeaker’s web interface .
X
Navigate to the
RX STREAMS
menu item in the menu on the left .
The table in the center of the page will show the current routed audio .
X
Click on the trash can icon on the right of the list to remove the connection .
This will un-route all channels of the AES67 stream from the internal DSP .
The audio will stop playing .
The entry in the table will be removed .
Routing DANTE® AES67 with RX STREAMS using an SDP file
To establish a connection:
X
Obtain the SDP file of the DANTE® AES67 audio stream .
X
Open the loudspeaker’s web interface .
X
Navigate to the
RX STREAMS
menu item in the menu on the left .
X
Click the
icon next to
AES67 RX Streams
.
The
Advanced
tab on the right will be enabled .
X
Ignore the
Destination Name
dropdown .
X
Enter a name for the stream .
X
Copy the plain text from the SDP file and paste it into the
Destination SDP
box .
X
Highlight the first two lines in the
Selected Channels
box:
TDM.0 – I8S: #0
and
TDM.0 – I8S: #1
X
Click the downward arrow next to the
Selected Channels
box to enable these internal chan-
nels .
X
Leave the
Link Offset
box as it is .
X
Click
Update Destination
.
This will route all channels of the DANTE® AES67 stream to the internal DSP .
The audio will start playing .
The table in the center of the page will show the routed audio .
To remove a connection:
X
Open the loudspeaker’s web interface .
X
Navigate to the
RX STREAMS
menu item in the menu on the left .
The table in the center of the page will show the current routed audio .
X
Click on the trash can icon on the right of the list to remove the connection .
This will un-route all channels of the DANTE® AES67 stream from the internal DSP .
The audio will stop playing .
The entry in the table will be removed .
EN
