KH 150 AES67 |
23
X
Edit the IP address, IP mask and gateway according to your requirements .
X
Click
Apply
to save the changes .
To set up
IP addresses
for
redundant
mode:
X
Click on each line for each socket (eth1 .10 and eth2 .20) of the IP Address page .
X
Edit the IP address, IP mask and gateway according to your requirements .
X
Set the IP addresses for eth0 and eth1 .10 in separate IP ranges for redundant operation .
X
Click
Apply
to save the changes .
To set up the
network redundancy
mode:
X
In the web interface, navigate to the
AES67 CONFIG
menu item in the menu on the left .
The AES67 configuration screen will be displayed .
X
Select the desired redundancy mode from the dropdown menu in the
Settings
tab on the
left .
The default redundancy mode is non-redundant .
X
Click
Update Redun Mode
to save your changes .
EN
