Postfach 4063
Ust.-Id-Nr.:
Märkische Bank eG
170 143 100 (BLZ 450 600 09) Amtsgericht Iserlohn HRA 822
58663 Hemer
DE 812 45 68 50
Sparkasse Hemer
31 898 (BLZ 445 512 10) pers. haft. Gesellschafterin:
Telefon 0049-2372-9274-0
e-mail:
Dresdner Bank AG
704 282 600 (BLZ 445 800 70) Wolfgang Hellwinkel Verwaltungs GmbH
Telefax 0049-2372-3304
Postbank Dortmund 28 37 – 469 (BLZ 440 100 46) Amtsgericht Iserlohn HRB 2088
Geschäftsführer: Robin Hellwinkel
Safety at work
Always make sure not to touch the hot units with bare fingers or
hands. For hygienic and safety reasons we recommend you to use
wrist covering gloves. Furthermore, we recommend you to use
appropriate utensils for filling and for taking-out the food, for example
sausage tongs, a fork for the rolls. NEVER touch the hot food with bare
hands. Danger of burnings!
Cleaning
Disconnect unit from power supply and wait until the unit has cooled down before you
begin with any maintenance or cleaning procedures.
Food residues or spots on the surfaces have to be cleaned immediately (make sure
not to burn yourself as the units could still be hot) or at the latest before operation.
Use a dry cloth for cleaning if only slight residues have to be removed. If this is not
sufficient, please wait until all parts of the unit have become cold, and clean with an
appropriate, non-abrasive detergent. It is possible to clean removable parts in the
dish-washer.
Special cleaning for basket and water container:
At calcareous water calcifications may corrode the stainless steel. In this case please
pay attention to make decalcification cleaning regularly to avoid damages at the
stainless steel. Otherwise the material may be corrode. Take household vinegar and
water and mix it 1:10. Pour this into the container and let it react for 30 minutes at a
temperature of 60 °C.
The installation (only at not plug-in units) and any maintenance may only be done by
authorized technicians.
Never clean the unis by a water-jet!
Faults - repairs
Thermostat faults:
If the control lamp remains on, the regulator might be defect. In this case the unit will
be heated continuously for a period longer than 30 minutes.
Heating element faults:
The pilot light is switched on for more than 30 minutes, but the unit does not become
hot.
In these two cases, please disconnect the unit from the power supply/pull out the
plug. Contact our service department and never try to repair the unit by yourself.
