5. Delivery, internal transport, unpacking
5.1 Security
5.1.1
In dealing with this device and all electrical devices must be in principle rules
for their own safety.
In particular, these are:
* do not expose the unit to weathering, such as rain.
* This device is not intended to be used by persons (including children) with restricted
physical, sensory or mental capabilities, or lack of experience and / or lack of
knowledge, unless directed or supervised by a person responsible for their safety , as
the device is to be used. Children should be supervised to ensure that they do not
play with the appliance.
5.1.2
After unpacking, make sure that the unit has not been damaged.
In case of doubt, do not operate the unit and inform our service.
Keep packaging materials (plastic bags, styrofoam, nails, etc.) out of the reach of
children.
These parts are dangerous sources!
5.1.3
Use only for the specified purpose.
5.2 Transport
The transport route is decisive for the type of packaging. The packaging
corresponds, if not specially contractually agreed, to the packaging guidelines ADSp,
which is approved by the Federal Association for Forwarding and Logistics e.V.
Immediately check delivery for completeness and transport damage. In the case of
externally identifiable transport damage, the delivery can not be accepted or
accepted only with reservation. Please state the extent of damage to the transport
documents / delivery note of the freight forwarder, record the damage in a
photodocumentary manner, report any damage to Ernst Neumärker GmbH & Co.KG
at 02372-9274-0, do not return the device without consultation.
5.3 Internal transport
Always handle the unit with care.
Care must be exercised when transporting the
appliance, in order to prevent damage caused by
shocks or careless loading or unloading.
Avoid shocks during transport. The appliance itself
must be treated with care. If the devices are not installed
immediately after delivery, they must be carefully stored
in a protected place. They must be properly covered so
that no dust or moisture can penetrate.
5.4 Unpacking
After unpacking the unit, check for any damage.
Before use, remove the protective film. If adhesive residues should remain, remove
Summary of Contents for 12-40424 DT
Page 18: ...For your notes...
