NeuLog Sense Autonomous, Manual, Page: 39 / 90

33
1.4.1 Programs and procedures
1.
Click on the Program button and a list of general instructions appear.
2.
Click on the Procedure name button and drag it to the right.
3.
The Procedure name instruction has a field for the procedure name. Write
in this field the name FORWARD .
4.
Create the following FORWARD procedure:
Note:
A procedure ends with Procedure end or Procedure start .
5.
Create the following BACKWARD procedure:
Note:
In order to duplicate a set of instruction, click on the first instruction, move
it a little with the mouse, keep pressing the mouse button and click
Ctrl+c .
Now click Ctrl+v and this will duplicate the set of instructions.
6.
Create the following STOP procedure: