Problem
Possible cause
Remedy
The flame is blow out immediately
after ignition
• Thermocouple is not heated suf-
ficient
• After lightning the flame, keep
the knob pushed for equal or less
than 10 seconds.
The gas ring burns unevenly
• Burner crown is blocked with
food residues
• Make sure that the injector is not
blocked and the burner crown is
clear of food particles.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, speak your dealer or the local Service Force
Centre.
If you operated the appliance incorrectly, or the in-
stallation was not carried out by a registered engi-
neer, the visit from the customer service technician or
dealer may not take place free of charge, even during
the warranty period.
These data are necessary to help you quickly and
correctly. These data are available on the supplied
rating plate.
• Model description .................
• Product number (PNC) .................
• Serial Number (S.N.) .................
Use the original spare parts only. They are available at
Service Force Centre and approved spare parts shops.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
MOD.
PROD.NO.
SER.NO
DATA
MOD.
PROD.NO.
SER.NO
DATA
MODEL
MODEL
MOD.
PROD.NO.
SER.NO.
03 IT
MADE IN ITALY
TYPE
230V-50Hz
IP20
0049
A
B
C
A) Stick it on Guarantee Card and send this part (if ap-
plicable)
B) Stick it on Guarantee Card and keep this part (if ap-
plicable)
C) Stick it on instruction booklet
8
