background image

Charging of battery pack
1. Recharge only with the charger specified by the manufacture.
2. Note: Battery is partially charged by shipping from factory,   
  User must fully charge the battery pack to ensure the  

 

  performance of the spray gun. Battery must remove from
  the gun before charging.
3.  The lithium-Ion battery pack can be charged at any  

 

  percentage of power left without shortening its lifecycle.    
  Accidently power off charging won’t damage battery pack.
4.  Battery pack is equipped with "Electric Cell Protection"
  (ECP) to avoid over-discharging. Spray gun will be turn
  off once the battery pack is fully discharged.
  Do not keep pressing the trigger when the tools
  was automatically turned off. This kind of trying press
  might damage battery pack.
5. The battery pack is equipped with NTC temperature monitor.  
  Charging temperature range 0°C to 45°C. Tools can only    
  work in temperature range from -10°C  to 70°C .
  Better get battery pack rest for 30 minutes right after
  working for the cell to cool down before re-charge.
6.  Remove the battery off spray gun if it will not be used
  for long time. Remove the battery pack as shown below,
  press the release button and pull the battery pack
  backward off the spray gun. Do not use excessive
  force during this operation.

Transportation 
1.  Lithium-ion battery packs supplied with the appliance  

 

  must be subject to the Dangerous Goods regulations.
  Users can not transport the battery pack without
  additional protective packaging.
2.  However, special packaging and markings are necessary   
  for handing over to third parties (eg. by air freight or freight  
  forwarder). So that you must ask the dangerous goods    
  expert about the delivery of dangerous goods.
3.  Make sure that the battery pack is not damaged before    
  transportation. Guard the exposed terminals and 
  package the battery pack to avoid electric shock
  in the package box.
4.  If necessary, consider the relevant national regulations.
                  
                Follow the disposal instructions.

Disposal

 

Environmentally friendly recycling of spray gun,   

 

Battery pack, accessories and package.

 

Do not disposal spray gun and battery pack into  

 

the household waste!

Battery pack

 

Li-Ion

 

Pay attention to the notes in the section    

 

"Transportation"

Battery Pack

8

Summary of Contents for NSG0060-18











Reviews: