background image

 

 

Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing 

and gloves away from moving parts. 

 

If  devices  are  provided  for  the  connection  of  dust  extraction  and  collection 

facilities, ensure these are connected and properly used. 

 

Do not force the power tool. Use the correct power tool for your application. 

 

Do not use the power tool if the switch does not turn in on and off. 

 

Disconnect  the  plug  from  the  power  source  before  making  any  adjustment, 

changing accessories, or storing power tools. 

 

Store  idle  power  tools  out  of  the  reach  of  children  and  do  not  allow  persons 

unfamiliar with the power tool or these instructions to operate the power tool. 

 

Maintain  power  tools.  Check  for  misalignment  or  binding  of  moving  parts, 

breakage  of  parts  and  any  other  condition  that  may  affect  the  power  tools 

operation. If damaged, have the power tool repaired before use. 

 

Use  the  power  tool,  accessories  and  tool  bits  etc,  in  accordance  with  these 

instructions  and  in  the  manner  intended  for  the  particular  type  of  power  tool, 

taking into account the working conditions and the work to be performed 

 

Have your power tool serviced by a qualified repair person using only identical 

replacement parts. 

 

Forbidden to spray to the hatch of the the motor and etc. 

 

When spraying normally, the motor should not be under the head of the gun 

and the container 

          01 

 

Summary of Contents for N3140

















Reviews: