13
+turn to the right –more material
-turn to the left -less material
Spraying technique
The
spraying
result
depends
considerably on how smooth and clean
the surface is before spraying begins.
For this reason the surface should be
carefully prepared and kept free of dust.
Surfaces not to be sprayed should be
covered with sticky tape and newspaper.
Cover threads and the like on the object
to be sprayed.
It is advisable to carry out a trial
spraying onto cardboard or a similar
surface to find the most suitable spray
gun adjustments.
cm
Important
: start spraying outside the
surface to be sprayed and avoid
stopping on the surface.
Right (fig.11)
Always hold the spray gun at an even
distance of approx. 5-15cm from the
object to be sprayed.
Move the spray
gun evenly across or up and down,
depending on the adjusted spraying
effect. An even movement of the spray
gun will give a uniform surface quality
Wrong (fig.12)
Excessive
paint
mist
formation
uneven surface finish
If coating material builds up on the nozzle (2) and air cap (1) clean both parts with
solvent or water.
Breaks in work
⚫
Turn off device.
⚫
Place spray gun in spray gun holder.
