Technical Data
N2000-US
Voltage [V]
120
Frequency [Hz]
60
Power [W]
1500
Current consumption [A]
9
Switch
Ⅰ
-0–
Ⅱ
Position
Temperature [
o
C]
[
o
F]
Ⅰ
Ⅱ
50-450
90-600
100-850
194-1112
Position
Airflow [ L/min]
[cfm]
Ⅰ
Ⅱ
300
500
10.56
17.6
Protection class
ll / [double insulated]
Intended Use
When observing the safety rules and using the original accessories ,this hot air tool is intended for all
applications with hot air that arelisted in these operating instruction
Attaching the Nozzle onto the Heating-element Tube
A Falling down nozzle can set an object on fire. Nozzles must be mounted firmly and secure on the
unit.
Touching a hot nozzle can lead to serious burns .Before attaching or replacing a nozzle, allow the
unit to cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use only
original nozzles according to the table that are suitable for your unit.
Putting into operation
Observe the mains voltage: The voltage of the power source must agree with the value given on the nameplate of the
unit .Extension cords must have a conductor cross section of 2x1.0mm
2
min.
Switching On:
Set the switch 1 to I OR II. Set the temperature controller 2 as required.
Switching Off:
To cool the unit off, set the switch 1 to II and temperature controller 2 to MIN. When the unit has cooled off, Set the switch 1 to 0.
For Unit Guarantee
We provide a guarantee in
accordance with the legal/country specific regulations
from the date of purchase (verified by invoice or
delivery document).
Damage that has occurred. will be corrected by replacement or repair.
Damage attributable to normal wear. and tear,overload or improper handling if the unit should fail despite the care taken in
manufacture and testing,repair should be carried out by an authorized customer service agent for power tools.
Maintenance and cleaning
Before any work on the unit itself,pull
the power plug. For safe and efficient working always keep the unit and its ventilation
slots clean. If the unit should fail despite the care ,Taken in manufacture and testing,repair should be carried out by an
authorized customer service agent for power tools.
Environmental Protection
Recycle row material instesd
of dissposing as waste
The unit,accessories and packaging
should be sorted for environmentally-friendly recycling.
Applications
Shrinking of shrink-down tubing, solder connectors and solder terminals, packaging and electrical
components
Deforming of articles made from acrylic, PVC, and polystyrene, tubing, plates and profiles, as well as moist
woods.
Welding of thermoplastic polymer, flooring materials of PVC and linoleum, PVC-coated fabric, tarpaulins
and foils.
Soldering of tin, special silver solder, SMD elements, cable lugs, and for loosening soldered connections.
Paint removal-Removal of old and even thick coatings of oil paint , varnish and synthetic plaster.
Drying of color shade samples, filler, adhesives, construction joints and stucco forms.
Joining adhesives-Large-surface gluing with contact adhesives, activation of pressure-sensitive adhesives,
acceleration of bonding processes, releasing of bonding points as well as releasing or bonding of edge band
or veneer.
Defrosting of icy stairs and steps, door locks, trunk lids, car doors or water pipes, as well as for defrosting
refrigerators and ice boxes.
Disinfection-With hot air of 600
℃
, you can quickly rid animal sties/stables of bacteria .Woodworm
infestation can be controlled (Caution: Danger of fire! Do not heat up the wooden surface excessively).
