NTI RACK MOUNT CONSOLE TERMINAL WITH CONSOLE SWITCH
41
4.4 TERMINAL Command Guide
4.4.1 Commands Supported in ASCII Personalities
Table 8 lists all the ASCII commands recognized by the terminal. The native mode code for the command is given in the second
column. (The native mode includes WY-325,WY-120 and WY-60.) The remaining columns show the support for the command in
other ASCII personalities according to the following notations:
Same
Same as native code (code is native to other terminal also)
Wyse
Same as native code (Wyse enhancement- code not native to other terminal)
ENH
Same as native code when enhance mode is ON (Wyse enhancement - code not native to other terminal) A code listed under a
nonnative personality indicates that the related terminal's native code is supported.
A blank in any column indicates that the command is not supported.
Variables are shown in italics. Their values are listed in alphabetical order at the end of the table.
Footnotes are found at the end of Table
8 on page 46.
Table 8- Commands Supported in ASCII Personalities
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Command
------------------------------------------------------------------------------------------------------------
Native
Wyse
ADDS
TVI
PC
FUNCTION
Mode
WY-50+
VP
A2
910+/925 Term
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Monitor Mode
Monitor
mode
on
ESC
U
Same
Same
Same
Monitor
mode
off
ESC
u
Same
Same
Same
or
ESC
X
Same
------------------------------------------------------------------------------------------------------------------------------------------------------------
Selecting Personalities
Enhance mode off
ESC ~ SPACE Same
ENH
ENH
ESC v SPACE
Enhance mode on
ESC ~ !
Same
ENH
ENH
ESC v !
Select WY-50+ mode
ESC ~"
Same
ENH
Wyse
ESC v "
Select TVI 910+ mode
ESC ~ #
Same
ENH
Wyse
ESC v #
Select TVI 925 mode
ESC ~ $
Same
ENH
Wyse
ESC v $
Select ADDS VP A2 mode
ESC ~ %
Same
ENH
Wyse
ESC v %
Select Console ANSI mode
ESC ~ A
Same
ENH
Wyse
ESC v A
Select Native mode
ESC ~ 4
Same
ENH
Wyse
ESC v 4
Select PC Term mode
ESC ~ 5
Same
ENH
Wyse
ESC v 5
Select VT52 mode
ESC ~ 6
Same
ENH
Wyse
ESC v 6
Select VT100 mode
ESC ~ ;
Same
ENH
Wyse
ESC v ;
Select PCGAPHIC mode
*1
ESC ~ I
Same
ENH
Wyse
ESC v I
Select VT220-7 mode
ESC ~ <
Same
ENH
Wyse
ESC v <
Select VT220-8 mode
ESC ~ =
Same
ENH
Wyse
ESC v =
Select WY-325 mode
*3
ESC ~ B
Same
ENH
Wyse
ESC v B
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Communicating with the computer
Enable transmission
CTRL Q
Same
Same
Same
Same
Stop transmission Disconnect
CTRL S
Same
Same
Same
Same
Send ACK (if ACK mode on)
CTRL E
Same
Wyse
Same
---------------------------------------------------------------------------------------------------------------------------------------------------------------
