Viking D30FTW Installation Manual Download Page 1

Page: 1 / 4

F20702A EN

(010810J)

Viking Range Corporation

111 Front Street

Greenwood, Mississippi 38930 USA

(662) 455-1200

For product information,

call 1-888-VIKING1 (845-4641)

or visit the Viking Web site at

vikingrange.com

Viking Installation Guide

D30FTW - Designer Warming Drawer

Accessory Flush Mount Kit

For Use with DEWD102

Summary of Contents for D30FTW

Page 1: ...Street Greenwood Mississippi 38930 USA 662 455 1200 For product information call 1 888 VIKING1 845 4641 or visit the Viking Web site at vikingrange com Viking Installation Guide D30FTW Designer Warming Drawer Accessory Flush Mount Kit For Use with DEWD102 ...

Page 2: ...g Flush Mount Trim After removing the existing side trim pieces install the flush mount trim piece to the warming drawer 1 Remove the protective plastic from the flush mount trim piece 2 Install the flush mount trim piece to the unit with screws provided 3 After installing the flush mount trim piece the warming drawer can be installed into the prepared cutout ...

Page 3: ...unit to sit properly inside the cutout the bottom must be built up or shimmed by 1 2 blocking See illustrations below This will provide stability for the unit and allow it to sit upright when pushed back into the wall Finished Surfaces Vertical Blocking Bottom Spacer Blocking LEGEND Blocking Finished Surfaces B A C FLUSH CUTOUT A 29 5 8 75 2 cm B 25 1 8 63 8 cm C 10 1 8 25 7 cm ...

Page 4: ...6 7 Securing Inside the Cutout cont Vertical Blocking Distance will vary depending on the cabinet A B Top View Screw Screw CRITICAL DIMENSIONS A 28 1 2 72 4 cm B 1 1 2 3 8 cm ...