ASI-IP-GTW User's Manual
Page
62
Metric on clear:
The metric number to be used in the RIP messages
when there are no active alarms in the unit.
Metric on critical:
The metric number to be used in the RIP messages
when there are at least one critical alarm present.
Destination:
The IP destination address to use for the RIP messages.
Enable manual next hop:
If set, the RIPv2 messages will specify the
next hop as defined in the “Next hop address” field.
Next hop address:
The address to be used for the next hop.
Route tag:
Corresponds to the route tag field in the outgoing RIP
messages.
Update interval:
Specifies the average update interval for the RIPv2
messages. Note that the ASI-IP-GTW adds some random delay to avoid
sending messages too regularly.
The status parameters are:
RIP-2 message count:
Shows the number of RIP-2 messages
transmitted.
Current metric:
Shows the current metric used in the outgoing RIP-2
messages. Will be either the “Metric on clear” or the “Metric on critical”
value.
Next hop:
Shows the next hop value.
