Modular Analog Audio Router
Rev. 8
Reset button
The reset button on the rear side is used to perform a hard reset of the card.
Do
not
perform a hard reset, unless the situation demands this. By performing
a hard reset, the user looses control of the router, and will not get control of
the router until approximately 20 seconds after releasing the reset button.
3.4.4
CF-card and battery
All the information regarding the router configuration, as well as information
regarding control panels that are connected to the router, is stored in the
Compact Flash card on the Syscon card.
If it is necessary to remove and/or insert a CF card, the following must be
done:
Compact Flash card
1.
Remove the Syscon card from its slot, according to the description
earlier in this manual.
2.
Slide the CF card out of its socket, and insert the new CF card into the
socket.
3.
Insert the Syscon card into its slot, according to the description earlier
in this manual.
If it is necessary to remove and/or insert a battery, the following must be
done:
Battery
19