Network Appliance VikinX A128128M, User Manual, Page: 18 / 34

Modular Analog Audio Router Rev. 8
3.4.3 Status LEDs and Reset button
There are 4 LEDs on the front side of the Syscon card, and a reset button on
the rear side.
Status LEDs
The LEDs indicate the following:
Diode Red LED Yellow LED Green LED No light
Status Card error. Not applicable. Overall status of the
card is OK Card has no power, or
is not inserted
correctly.
Eth Not applicable. Full duplex
connection. Half duplex
connection. No Ethernet link
established; check
cable.
Warn Abnormal situation:
no functional error,
but a situation that
requires attention.
See also Chapter 6. Not applicable. Normal situation. Not applicable.
Load High load on the
μ
Controller.
May occur during
system start up and
software
reconfigurations / -
upgrades.
Medium load on the
μ
Controller.
Low or normal load
on the
μ
Controller.
Not applicable.
18