To wirelessly control Z809B, it is required to pair with ZigBee enabled on/off/level
controller. If you do not wish to control Z817B with a remote or a switch, you may skip this
step and go to
How to use Z809B
.
Pairing operation:
1).
Hold press the binding key for 3 seconds until you see the network indicator
flash
green
once while it sends binding request to the air.
2).
Likewise, do the same on the level switch to exchange binding according to the
instructions of that device
3).
When binding is successful the
green
indicator on Z809B will flash 5 times then
return to solid lit. If successful you should be able to wireless control Z809B.
Otherwise it flashes quickly 10 times indicating pairing unsuccessful.
Clear pairing setting
:
You may remove the pairing between the two or more devices.
Unbinding procedure is exactly the same as binding operation. When you repeat the
binding operation, the two devices will remove the binding information stored..
S
tep 2.
Device pairing for On/Off/Level control (binding)