4
4.
Set up Instruction
On/Off
Power on
Insert batteries. (Users may need a screwdriver to open the cover)
Turn on
Press any function key to turn on the device. After releasing the key, the red and green indicators
will flash at the same time to indicate that it turns on successfully.
Turn off (Restore to factory setting)
Press and hold both keys for 5 seconds till the green indicator flashes and then release;
LED flashes quickly 20 times.
Power off
Remove Batteries.
Note:
1. After remove and insert the battery, the device memorizes previous on/off state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
3. Do not power on the device while any function key is pressed, otherwise the device will enter
the engineering test mode.
Network Joining
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
Suggest to check the device verification information on the gateway or consult your platform
server provider.
Function Key and Test Key
Press and hold both keys for 5
seconds
Restore to factory setting / Turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
Press function key once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
Press test key once
The device is in the network: The buzzer alarms for 5 seconds, the red indicator flashes 5 times,
and sends a report
The device is not in the network: green indicator remains off
