8
Uplink 1: 010D0500FFFF0064FFFF00 (RA0701Y)
1
st
byte (01): Version
2
nd
byte (0D): DeviceType 0x0D
－
RA07xxY Series
3
rd
byte (05): ReportType
4
th
byte (00): DC power supply
5
th
6
th
byte (FFFF): O3
7
th
8
th
byte (0064): CO
－
10ppm , 64 H
ex
=100 D
ec
100*0.01=10 ppm
9
th
10
th
byte (FFFF): NO
11
th
byte (00): Reserved
p.s. RA0701/R72601/RA0701Y only detect CO, it does not detect NO and O3, therefore the returned value of NO and O3
would be “FFFF”.
6.
Installation
1.
The RA0701
product does not have a waterproof function.
After the network adding configuration is completed, please place it properly.
The sensor should be placed in a sheltered environment from the wind and rain, and the wall should be perpendicular to the
ground at 90 degrees. Keep the sensor air vent hole directly below to prevent water to enter.
At the same time, in order to ensure the accuracy of the measurement, please install the carbon monoxide transmitter in a well
ventilated position.
