9
2.
The R72601
product is waterproof. After the network-joining is completed, please leave it outdoors.
(1) In the position to be installed, loosen the U-shaped screw of the bottom of the R72601 and the mating washer nut, and fix the
U-shaped screw through the appropriate size cylinder on the R72601 fixed strut piece. Install the washer nut in order, lock
the nut till R72601 body is stable and does not shake.
(2) At the upper side of the fixed position of R72601, loosen the two U-shaped screws on the side of the solar panel and the
mating washer nut. Fix the U-shaped screw through the appropriate size cylinder on the main bracket of the solar panel, and
install the gasket in sequence. Lock nut till the solar panel is stable and does not shake.
(3) Adjust the angle of the solar panel. After the adjustment is completed, lock the nut.
(4) Connect the R72601 top waterproof cable to the solar panel wiring and lock it tight.
(5) R72601 has a battery pack inside, users can buy and install rechargeable 18650 lithium battery, a total of 3 sections, a single
rechargeable lithium battery voltage 3.7V, capacity recommended 5000mah, the installation of rechargeable lithium battery
steps are as follows:
1: Remove the four screws around battery cover.
2: Insert three 18650 lithium batteries. (Please make sure the positive and negative level of the battery)
3: Press the activation button on the battery pack for the first time.
4: After activation, close the battery cover and lock the screws around battery cover.
Fig. Rechargeable Lithium Battery
activation button
