3
3. Main Features
⚫
Compatible with LoRaWAN protocol
⚫
2 sections ER14505 3.6V Lithium AA battery
⚫
Detect the acceleration and speed of the X, Y, and Z axes
⚫
The base is attached with a magnet that can be attached to a ferrous object
⚫
Protection level IP65
⚫
Compatible with LoRaWANTM Class A
⚫
Frequency hopping spread spectrum technology
⚫
Configuration parameters can be configured through third-party software platforms, data can be read and alarms can be set via SMS text and
email (optional)
⚫
Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne
⚫
Low power consumption and long battery life
⚫
Note*:
Battery life is determined by the sensor reporting frequency and other variables, please refer to
http://www.netvox.com.tw/electric/electric_calc.html
On this website, users can find battery life time for varied models at different configurations.
4.Set up Instruction
On/Off
Power on
Insert batteries.
(users may need a flat blade screwdriver to open)
Turn on
Press and hold the function key for 3 seconds till the green indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till green indicator flashes for 20 times.
Power off
Remove Batteries.
Note:
1. Remove and insert the battery; the device is at off state by default.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor inductance and other
energy storage components.
3. Five seconds after power on, the device will be in engineering test mode.
Network Joining
Never joined the network
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send request.
Note: Suggest to remove batteries if the device is not used to save power.
Suggest to check the device verification information on the gateway
or consult your platform server provider.
Function Key
Press and hold for 5
seconds
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: green indicator flashes once and sends a report
The device is not in the network: green indicator remains off
