B
D
E
G
H
I
J
B
C
D
E
F
G
H
I
J
A
F
C
A
Provides overall basic control limited to switching & routing video inputs and outputs. Can be used in conjunction
with basic IR remote which is included.
Variable line-level audio outputs, matched to HDBaseT outputs 3-8 via jack sockets. Control of Audio volume can be
achieved through the Netvio GO iOS, iPadOS and Android. application or via the published API available online at
www.netvio.co.uk
Global IR Input Port
Audio Outputs
Used to send IR signals to a specific display area. Useful applications include sending IR signals from a 3rd party control
system to a display area. For this application it is important to use the provided 3.5mm to 3.5mm jack cable between
matrix and control system IR output ports. Netvio does not support the use of 3rd third party IR accessories.
IR Input Ports
Allows a single cable connection to send an IR signal to all displays simultaneously. For this application it is
important to use the provided 3.5mm to 3.5mm jack cable between matrix and control system IR output ports.
Netvio does not support the use of 3rd third party IR accessories.
Global IR Input Port
Used to send IR signals received from the display location, then repeated to a media source via a supplied IR
emitter cable. Netvio does not support the use of 3rd third party IR accessories.
IR Output Ports
Global IR Output Port
Point-to-point bi-directional communication from 3rd party control system to a single display location. Ensure TX to
RX & RX to TX wiring (including ground connections), Always use the provided green 3-pole connectors for matrix
side. At the display area, RS-232 connections are made available on all Netvio HDBaseT receivers.
Direct Zone RS-232
Ground screw for 3mm tag.
Ground Connection
Rear Panel
Allows a single cable connection to send an IR signal to all media sources simultaneously. For this application it is
important to use the provided 3.5mm to 3.5mm jack cable between matrix and control system IR output ports.
Netvio does not support the use of 3rd third party IR accessories.
Drivers available at www.netvio.co.uk
7
USB charging function only. Provision for future product upgrade.
USB Charging Ports
RJ-45 network connection for IP control. DHCP (auto assigned without DHCP). Required connection for use with
Netvio 360 configuration utility. RS-232 serial communication via 9W D connection. RS-232 interface cable
provided.
Communication Ports
