NetterVibration NTK 110, Operating Instructions Manual, Page: 9 / 24

Technical data
9
Type
NTK /
Freely oscillating part
Oscillating
weight*
[kg]
Air
consumption
[l/min]
Frequency
[min
-1
]
Centrifugal
force
[N]
Unbalance
[cmkg]
2 bar 6 bar 2 bar 6 bar 2 bar 6 bar 2 bar 6 bar
8 AL S1 0.030 7 32 2,440 3,657 15 44 0.05 0.06
(K+SM 8-2) S2 0.088 6 25 1,380 2,080 15 50 0.15 0.37
15 X S1 0.135 17 72 1,745 2,544 49 104 0.29 0.33
(K+SM 16-2) S2 0.675 14 54 758 1,152 53 123 1.69 1.95
16 S1 0.150 14 58 1,680 2,400 42 106 0.27 0.34
16 S3 1.330 8 39 600 923 96 210 4.90 4.50
18 AL , 18 AL M1 S1 0.210 19 68 1,600 2,350 41 109 0.29 0.36
(K+SM 16-1) S2 0.530 13 58 972 1,572 61 191 1.18 1.41
25 AL S1 0.420 34 149 1,289 1,986 107 269 1.18 1.24
(K+SM 25-3) S2 1.655 22 115 686 1,080 177 419 6.88 6.55
25 S1 0.470 38 156 1,440 2,270 127 374 1.12 1.32
25 S3 2.600 24 102 690 1,067 237 612 9.10 9.82
28 AL S1 0.590 38 135 1,488 1,818 255 381 2.10 2.10
(K+SM 16-2) S2 1.130 30 136 1,110 1,488 240 423 3.55 3.48
40 AL S1 1.240 54 220 1,231 2,094 239 519 2.88 2.16
(K+SM 25-3) S2 2.475 36 210 900 1,389 298 787 6.72 7.44
40 S1 1.270 49 228 1,200 1,930 282 503 3.57 2.46
40 S3 4.200 34 161 600 1,108 385 1,100 19.48 16.36
55 AL S1 2.100 98 398 1,500 2,400 447 839 3.62 2.66
(K+SM 85-1) S2 3.430 83 384 1,113 1,768 492 1,077 7.25 6.28
55 NF S1 2.100 101 408 1,405 2,351 441 872 4.08 2.88
55 NF S3 5.900 64 330 884 1,467 617 1,588 14.40 13.47
85 NF S1 5.200 166 545 1,892 2,830 767 2,215 3.91 5.04
85 NF S3 12.100 148 532 1,200 1,838 1,073 2,428 13.59 13.11
110 S1 8.000 210 652 2,133 3,040 1,505 3,986 6.03 7.87
110 S3 16.600 207 634 1,447 2,133 1,548 3,974 13.48 15.93
* all specified weights incl. fastening screw of additional oscillating weight
These data are comparative values and can vary depending on the application. Further data on request.
By changing the weight of the freely oscillating part (e.g. by attaching an
additional oscillating weight to the piston or housing), the oscillation band-
width and the unbalance change. This means that by selecting the freely
oscillating part, the unbalance can be preselected.
Parameters
Unbalance