Installation
17
For inclined or horizontal mounting of the NTK, the
vibration mass of the freely oscillating part S1, S2 or
S3 (see section Parameters, page 9) may only ex-
ceed the following value if the vibration mass is sup-
ported by a spring:
Type
NTK
Vibration mass to
be supported
[kg]
8 AL
0.15
15 X
0.70
16
1.00
18 AL, 18 AL M1
0.75
25 AL
1.60
25
3.00
28 AL
1.60
Type
NTK
Vibration mass to
be supported
[kg]
40 AL
3.5
40
5.0
55 AL
6.5
55 NF
9.5
85 NF
18.0
110
20.0
Using the NTK as impactor is possible.
A prior consultation with
Netter
Vibration
is recommended.
The piston must strike against a surface
standing vertically to the NTK.
For this application lubricated com-
pressed air is mandatory.
Warning:
NTK have moving parts which can cause injuries. Direct contact
with an oscillating part must be prevented on site by structural measures,
for example by shielding.
For the NTK 8 AL type a cover sleeve can be supplied.
Supported
vibration
mass
Using as
impactor
Provide
shielding