NVF-200SE/PD Power over VDSL Master/Slave USER’S MANUAL Ver. B.4
30
5. Symptom: NVF-200PD PoE LED does not light up.
Cause:
The networking device connecting to the NVF-200PD does not follow IEEE802.3af PoE standards.
Solution:
Make sure that the networking device must conform to IEEE802.3af PoE standards. Also, Make
sure that the networking device has embedded power splitter. If not, use an external power splitter
for connecting to NVF-200PD.
6. Symptom: Power splitter cannot power feeding to networking device.
Cause:
NVF-200PD built-in power injector output is limited by phone cable length.
Solution:
Make sure to follow the product specification of NVF-200PD power injector output by differential
cable length.
7. Question:
We using NV-200SE/PD kits and the end point device (NVF-200PD)when touch gives them a shock.
Answer:
NVF-200SE will supply DC 96V for feeding NVF-200PD at long length phone cable. Regarding this
issue, please connecting FG of NVF-200SE/PD on rear panel to earth ground. Our NVF-200SE/PD
had been approval by CE EN60950 of safety certification.
