NVF-200SE/PD Power over VDSL Master/Slave USER’S MANUAL Ver. B.4
2
Foreword
NVF-200SE system delivers power and IP connectivity at distances up to 1km (3,280ft) using existing or new copper twisted pair
phone cable. These innovative transmission techniques result in power feeding and data over a single pair phone wire and are ideal
for deploying extended Ethernet where there are no or limited electricity at one end. With automatic fault protection and power
monitoring, these ensures reliable delivery of essential power and data / video to and from remote locations. Operators in diverse
enterprises will now be able to deploy PoE devices in any service location. Install network security cameras, wireless access points,
security / RFID scanners or access control systems in any place where you have basic wire connectivity.
The NVF-200SE / PD provide extended-length power and Ethernet connections over one pair Cat. 3 or above twisted pair phone
cable. The NVF-200SE / PD works as Ethernet to / from VDSL subscriber site conversion bridge. The NVF-200SE / PD uses VDSL
technology which support 5M / 15 / 25Mbps per port symmetrical bandwidth over phone wiring with long driver capable of a
maximum 1km / 0.8km / 0.5km (3280ft / 2624ft / 1680ft).
The front-panel provides LED indicators of power system and interface status. Full- or half-duplex mode of LAN operation is
automatically sensed and configured. VDSL link rates are configured by NVF-200SE over the auto-speed / fix speed function.
Therefore, NVF-200SE / PD supports auto-speed / fix speed, plug & play operations on the subscriber-site and power protections as
OVP(Over Voltage Protection), OCP(Over Current Protection), OTP(Over Temperature Protection), robust short-circuit protection
and surge protection, as well as are part of an ideal solution for delivering cost-effective, high-performance broadband / multimedia
services to point to point application.
Attention:
Be sure to read this manual carefully before using this product. Especially Legal Disclaimer, Statement
of Conditions and Safty Warnings.
Caution:
The NVF-200SE/PD is for indoor applications only. This product does not have waterproof protection. Do not use in harsh
environments (Over temperature range:
0°C ~ 50°C (32°F ~ 122°F)).
