NV-720D ADSL2+/VDSL2 dual band Wi-Fi USER’S MANUAL Ver. B.2
22
Before installing power and device, please read and follow these essentials:
Use separate paths to route wiring for power and devices. If power and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
Note:
Do not run signal or communications wiring and power wiring through the same wire conduit. To avoid interference, wires with
different signal characteristics should be routed separately.
You can use the type of signal transmitted through a wire to determine which wires should be kept separate. The rule of thumb is that
wiring sharing similar electrical characteristics can be bundled together.
You should separate input wiring from output wiring.
We recommend that you mark all equipment in the wiring system.
The maximum wireless data transfer rate is derived from IEEE Standard 802.11b/g/n/ac specifications. Actual data transfer rate will
vary from network environment including: distance, network traffic, building site materials/construction, interference from other
wireless devices, and other adverse conditions.
