NV-720D ADSL2+/VDSL2 dual band Wi-Fi USER’S MANUAL Ver. B.2
75
8.
Question
:
We need to set up a default gateway on a NV-720 pair which is in Bridge mode, as they want to
manage the units from a different network.
Answer:
When the application is used within the LAN, the switch (bridged) mode is not necessary to set up a
gateway .However, if the application crosses various network segments (LAN to WAN or WAN to
LAN), you must set up a gateway to connect a different network segment.
Regarding on how to configure a default gateway at switch (bridged) mode for crossing various
network segments.
Example for configuring the gateway from static routing:
Destination LAN IP:
0-0-0-0
Subnet Mask:
0-0-0-0
Gateway:
255-255-255-0
Note:
Static Routing functionality is used to define the connected Gateway between the LAN and
WAN.
9. Question:
What can I do if I forgot my password?
Answer:
If you forgot your password, you must reset your router. This process will change all your settings
back to the factory default. To reset the router, locate the reset button on the rear panel of the unit.
With the router powered on, use a paperclip to hold the button down for over 5 seconds. Release the
button and the router will go through its reboot process. The default IP is 192.168.1.1. When logging
in, the default username and password are both “
admin
”.
