netsys NV-600W User Manual Download

Page: 98 / 243

NV-600W Managed Wireless VDSL2 Router USER’S MANUAL Ver. A3

Fields in DNS:

Field

Description

IPv4/IPv6

Select the appropriate tab to configure IPv4 or IPv6. IPv6 support is currently not

available for DNS configuration.

Domain Name Server (DNS) Address

Enter the DNS address of the primary DNS server.

Secondary DNS Address (optional)

Enter the address of the secondary DNS server, if available. It is an optional

parameter.

Click

Cancel

to exit from this page without saving the changes.

Click

Apply

for deleting the WAN connection.

For enabling IPv6 function, click the

IPv6 setting

link (

IPv6 > IPv6 setting

) on the left navigation bar.

Summary of Contents for NV-600W




















































































































































































































































Search results

Summary of Contents for NV-600W

Reviews:

Related manuals for NV-600W

Brands by name

Popular brands

netsys NV-600W, User Manual

Search results

Summary of Contents for NV-600W

Reviews:

Related manuals for NV-600W

Brands by name

Popular brands