netsys NV-600W User Manual Download

Page: 45 / 243

NV-600W Managed Wireless VDSL2 Router USER’S MANUAL Ver. A3

Fields in Resource Access

Field

Description

Web Access

Web UI access permission - Local, Remote or both.

File Share Access

File share Access Permission - FTP, Samba or both.

Telnet Access

Telnet console access for user.

Fields in Account Option (Selected Edit boxes)

Field

Description

User Name

Type a new user name of account.

Current Password

The user should specify the current login password.

New Password

The user should specify the new password desired. The password should be at least

3 characters and not more than 16 characters in length without a white space.

Re-type Password

The user should re-type the new password entered in previous field.

Figure 4.3.3-1

Click

Apply

at any time during configuration to save the information that you have entered.

Click

Cancel

to exit from this page without saving the changes.

Summary of Contents for NV-600W




















































































































































































































































Search results

Summary of Contents for NV-600W

Reviews:

Related manuals for NV-600W

Brands by name

Popular brands

netsys NV-600W, User Manual

Search results

Summary of Contents for NV-600W

Reviews:

Related manuals for NV-600W

Brands by name

Popular brands