NV-600W Managed Wireless VDSL2 Router USER’S MANUAL Ver. A3
23
And the table shows the description. (
Table 3-2
)
Table 3-2
Description of the router rear connectors
Connectors
Type
Description
Reset
Reset Button
The reset button allows users to reboot the VDSL2 or load the default
settings.
Press and hold for 1-5 seconds: Reboot the VDSL2 Router
Press over 5 seconds: Load the default settings
Power
DC Power Jack
External Power Adapter: Input: AC 85~240Volts/50~60Hz
Output: DC 12V/1A
Line
RJ-11/Terminal Block
For connecting to a VDSL2 device. (
Do not
use RJ11 and Terminal
Block at the same time.)
Phone
RJ-11
For connecting to the POTS equipment or ISDN router
Gigabit Ethernet
(E1-E4)
RJ-45
For connecting an Ethernet equipped device.
Link (WAN)
RJ-11/Terminal Block
Allows data communication between the router and the VDSL2
network. (
Do not
use RJ11 and Terminal Block at the same time.)
WPS
WPS Button
Press this button to make a network connection through WPS
(
WPS
function is only supported on windows 7 or above operating systems
).
Every time the user presses the WPS button, there will be two minutes
of time to detect the available equipment.
