3.2 SSDs or 2.5" HDDs installation for storage
8
7. Install RAID card and other third-party PCIe cards into the proper PCIe slots within
NA338TB3 and tighten them with screws on third-party PCIe cards' brackets.
8. When RAID card and the other third-party PCIe cards are installed properly, restore
the PCIe expansion unit from upright position to the original horizontal position. And
screw the four black screws back to the unit.
1. Take out the drive trays in front of the NA338TB3 chassis.
2. Place each SSD or 2.5" HDD in the drive tray, and fix the drive with the four mounting
screws to the tray.
3. Insert the drive trays with SSDs/HDDs back to the NA338TB3 chassis.
Clicks!
