12
3. As the embedded Mac mini is connected to Netstor unit by Thunderbolt 3 cable, while
shutting down Mac mini through macOS, the entire NA338TB3 system will be
powered off simultaneously.
4.1.2 Mac/PC Connected to Netstor Unit Externally
1. After the NA338TB3 storage enclosure is connected to the power source by the power
cord, turn the power switch of NA338TB3's PSU at rear of the chassis to "I" position to
enable the power supply unit.
2. The NA338TB3 is designed to be powered on/off simultaneously with the Thunderbolt
3 host computer, so when computer is connected to Netstor unit externally by
Thunderbolt 3 cable, power on the host computer first, and then NA338TB3 will be
powered on automatically. (NA338TB3 also supports hot-plug and hot-unplug for
powering on and off)
Note:
When using the embedded Mac mini within the Netstor unit, if the user wants to force shut down Mac mini
due to macOS crash, press and hold the power button in front of NA338TB3 for seven seconds to allow
solenoid actuator to push and hold Mac mini's power button for shutting down.
