51
OptiView XG Network Analysis Tablet
Getting Started Guide
The touchscreen calibration data is stored on the hard drive. You will need to re-calibrate the touchscreen
after replacing the hard drive. See “Windows Touchscreen Settings” on
Changing the Computer Name
The analyzer’s name is stored on the hard drive. You can change the analyzer’s name as follows.
In Windows 7:
1. Select the Start button.
2. Right-click (or touch and hold)
Computer
.
3. Select
Properties
.
4. Select
Change settings
in the Computer name, domain, and workgroup settings section.
5. Type in the new name, and select
Apply
.
In Windows 10:
1. Right-click (or touch and hold) on the Windows Start button
in the lower left corner.
2. Select
System
.
3. Select
Change settings
in the “Computer name, domain, and workgroup settings” section.
4. Type in the new name, and select
Apply
.
Cleaning
Clean the OptiView XG housing, the touchscreen, and the batteries using a soft cloth that has been moistened
with mild detergent. Dry with a soft cloth. Do not spray liquid directly on the OptiView XG or the batteries. Do
not use harsh cleaners. Do not immerse.
