5.
Touch the
NEXT
button at the bottom left of
the screen.
6.
Touch
DONE
.
7.
The
SD card
storage location is now avail-
able from the
application,
and a notification appears in the
alerting you that it is con-
nected.
Using a USB Drive
Insert a USB flash drive into the
on the
top of the LR G2.
The
USB storage
location is now available from
the
application, and a notification
appears in the
alerting you
that it is connected.
Using a Micro-USB to USB Cable
1.
Plug a Micro-USB connector side of a USB
cord into the
on the right
side of the LR G2, and plug the USB side into
a PC or tablet. (If the LR G2 folder does not
open automatically on your PC screen, con-
tinue following the steps below.)
73
Software Management
Summary of Contents for LinkRunner G2
Page 1: ...NETSCOUT SYSTEMS Inc LinkRunner G2 User Guide October 30 2017...
Page 10: ...external websites and use the search feature to find specific terms 10 Introduction...
Page 25: ...Figure 4 App Store 25 Home Screen and Android Interface...
Page 76: ...6 Once the new software is downloaded touch Install to install it 76 Software Management...
