Ping:
Slide the toggle switch right to run an ICMP
Ping test to the target address test. The Port field
disappears when this toggle is enabled.
+ ADD TARGET
:
Touch to add additional target
address fields.
VLAN
Enable VLAN:
Slide the toggle to the right to
enable VLAN settings. Once enabled, VLAN ID and
VLAN Priority fields appear. Touch these fields to
open a pop-up number pad and enter the correct
ID and priority. Touch OK to save them.
User Defined MAC
Enable User Defined MAC:
Slide the toggle to the
right to enable a user-defined MAC address. When
enabled, the User Defined MAC field turns from
grey to black.
User Defined MAC:
If enabled, touch this field to
open a pop-up keyboard and enter your MAC
address. Touch OK to save it.
General Settings
Cable Unit:
Touch the down caret
to select
either meters or feet for the Cable Test unit of
39
LinkRunner G2 Application Settings
Summary of Contents for LinkRunner G2
Page 1: ...NETSCOUT SYSTEMS Inc LinkRunner G2 User Guide October 30 2017...
Page 10: ...external websites and use the search feature to find specific terms 10 Introduction...
Page 25: ...Figure 4 App Store 25 Home Screen and Android Interface...
Page 76: ...6 Once the new software is downloaded touch Install to install it 76 Software Management...
