Netscape Certificate Management System 6.0, Manual

Page: 81 / 377

Customizing Notification Messages
Chapter 2 Job Plug-in Modules 81
Tokens for Request In Queue Notification Messages
Table 2-9 lists the tokens that you can use for formulating the content of the
RequestInQueueJob
job’s summary report.
Tokens for Directory Update Notification Messages
This section lists the tokens that are available in summary message templates for
instances of the
UnpublishExpiredJob
class or plug-in module.
Table 2-10 lists the tokens that are available for this jobs’s summary report. You can
customize the content and format of the items in the report by using the tokens
defined in Table 2-11.
$RequestorEmail
Specifies the requestor’s email address.
$RequestType
Specifies the request type—whether it is a certificate enrollment, certificate
renewal, certificate revocation, key archival, or key recovery request.
$SerialNumber
Specifies the serial number of the certificate; the serial number will be displayed
as a hexadecimal value in the resulting message.
$Status
Specifies whether the operation failed or succeeded.
$SubjectDN
Specifies the distinguished name of the certificate subject.
Table 2-9 Tokens for the request-in-queue job’s summary report
Token Description
$InstanceID
Specifies the ID assigned to the subsystem that sent this notification.
• If the notification is sent by a Certificate Manager, this will be
ca
.
• If the notification is sent by a Registration Manager, this will be
ra
.
$ExecutionTime
Specifies the time the job (instance) was run.
$RecipientEmail
Specifies the email address of the recipient.
$SenderEmail
Specifies the email address of the sender.
$SummaryTotalNum
Specifies the total number of items (certificate requests that are pending in the
queue) in the summary report.
Table 2-8
Tokens for items in renewal-notification job’s summary report (Continued)
Token Description