Netrauta SAV-90569, Instruction Manual

Page: 9 / 24

EN
9
9
24
12e
Cmd
ELECTRICAL CONNECTION
• Connect the Hood to the Mains power sup-
ply, inserting a two-pole Switch with a con-
tact aperture of at least 3 mm.
• Remove the Metal grease filters (see par.
on “Maintenance”) and make sure that the
power supply Cable is properly inserted in
the Suction fan socket.
• Take the wires indicated in fig. 1 and pass
them through the slot formed on the galva-
nized diffuser support, as shown in fig.
2 .
• Position the finishing plug
27 over the
housing in the diffuser support, fixing it us-
ing a screw
12e (2.9 x 9.5) and applying the
2 cable clamp elements 26 as indicated in
figs. 3 and 4 .
• Connect the Controls Connector fig.
5 .
• Store both the Connectors in the Protective
box 24 and close it with 2 Screws 12e (2.9
x 9.5), provided.
• Remove the protective film from the dou-
ble-sided adhesive on the connection box,
and fix it inside the motor compartment fig.
6 .
1
2
3 4
5
6