background image

NG-188 User Manual 

2.5.7 

 

Digital Map 

 

Digit map is a set of rules to determine when the user has finished dialing.   
 
NG-188 support below digital map: 
Digital Map is based on some rules to judge when user end their dialing and send the number to 
the server. NG-188 support following digital map: 
----End With “#”:  Use # as the end of dialing.  
----Fixed Length:      When the length of the dialing match, the call will be sent. 
----Timeout:     

Specify the timeout of the last dial digit. The call will be sent after timeout 

----Prefix:    User define digital map: 

[ ]    represents the range of digit, can be a range such as [1-4], or use comma such as [1,3,5], 

or use a list such as [234]       

x    represents any one digit between 0~9   
Tn  represents the last digit timeout. n represents the time from 0~9 second, it is necessary. 

Tn must be the last two digit in the entry. If Tn is not included in the entry, we use T0 as default, it 
means system will sent the number immediately if the number matches the entry. 

Example: 
 

[1-8]xxx   

All number from 1000 to 89999 will be sent immediately. 

                9xxxxxxx 

8 digits numbers begin with 9 will be sent immediately. 

        911  

 

Number 911 will be sent will be immediately 

                99xT4 

 

3 digits numbers begin with 99 with be sent after four seconds. 

 

  24 / 46   

Summary of Contents for NG-188















































Reviews: