Netphonic NG-188 User Manual Download Page 5

Page: 5 / 46

NG-188 User Manual

The network connects:

2 RJ45 connect, a WAN, a LAN

One Liftline

1.4 Software

Support two sip servers running at the same time.

Back-up sip server support.

NAT,

Firewall.

DHCP client and server.

Support PPPoE, (used for ADSL, cable modem connecting).

Support major G7.xxx CODEC.

VAD,CNG.

G.168 compliant 32ms echo cancellation

Tone generation and Local DTMF re-generation according with ITU-T

E.164 dial plan and customized dial rules

Support Lifeline.

Hotline.

Speed Dial

Call Forward, Call Transfer, 3-way conference calls

Caller ID display

DND(Do Not Disturb),Black List,Limit List

Upgrade firmware through FTP or HTTP.

Web

management.

Reverse

polarity

Telnet remote management.

Voice

prompt

adjustable user password and super password

1.5 Standard and Protocols

IEEE 802.3 /802.3 u 10 Base T / 100Base TX

PPPoE: PPP Protocol over Ethernet

DHCP Client and Server: Dynamic Host Configuration Protocol

G.711 u/a; G729 audio Codec

SIP RFC3261, RFC 2543

IAX2

TCP/IP: Internet transfer and control protocol

5 / 46

Summary of Contents for NG-188















































Search results

Summary of Contents for NG-188

Reviews:

Brands by name

Popular brands

Netphonic NG-188, User Manual

Search results

Summary of Contents for NG-188

Reviews:

Brands by name

Popular brands