2-92 Command Line Interface Commands Reference
wireless
privacy
[
off
|
wep-manual
|
wep-auto
|
wpa-psk
|
wpa-802.1x
]
show
wireless
privacy
These commands allow you to specify, show, or disable the different types of wireless privacy.
Five possible arguments can be set for the
privacy
command:
wireless
psk
hex_string
no
wireless
psk
show
wireless
psk
These commands allow you to specify, disable, or show the Wi-Fi Protected Access (WPA) pre-shared secret key,
when wireless privacy is set to
wpa-psk
. The pre-shared secret key can be 8 – 63 alphanumeric characters or
64 hex digits. Entering a blank key will reset the pre-shared key.
wireless
passphrase
1..57_character_string
show
wireless
passphrase
1..57_character_string
These commands allow you to set or show a passphrase when wireless privacy is set to
wep-auto
.
off
turn off privacy
wep-manual
In this mode you enter encr yption keys. Command syntax for entering encr yption keys is
described in the previous section.
wep-auto
In this mode you enter a passphrase. Command syntax for entering a passphrase is
described below.
wpa-psk
In this mode you specify a pre-shared secret key (psk). Command syntax for entering a
pre-shared secret key is described below.
wpa-802.1x
In this mode you specify a RADIUS ser ver to be used for user authentication. Command
syntax for configuring RADIUS ser ver parameters is described in
“RADIUS Authentication
Configuration Commands” on page 2-119.
Note: The
wpa-802.1x
option is suppor ted beginning with Firmware Version 8.4.2.
