User Manual NetBox Wireless Router
58/99
4-Jan-10
manual_netbox_e
Trap target port:
The port where the traps will be sent to
Signal strength trap threshold dBm:
A trap will be sent, if signal strength goes lower than this.
Signal strength trap reactivation
threshold dBm:
No further traps will be sent as long signal strengt his not higher than
this.
SNMP traps are generated in the following situations, if the SNMP agent is enabled:
Startup of the NetBox
Shutdown of the NetBox
VPN connected
VPN disconnected
Signal Strength below
„Signal strength trap threshold“
The startup trap is implemented using the standard coldStart & warmStart traps.
The system-shutdown trap is sent, when the system is rebooted via the reboot function of the web interface
or when the watchdog reboots the system.
3.1.7.15
Telnet Server
Parameter
Description
Port:
Telnet server port
3.1.7.16
UDP Message Receiver
Parameter
Description
Port:
UDP message receiver port
The UPD Message Receiver is a service that listens on the configured port (default 2157) for arriving UDP
packets with a string in the payload. If an UPD package is arriving, the event “Arriving UDP Message” is fired
(see chapter 3.1.7.9.1 Events). Use the Event Manager (3.1.7.9 Event Manager) to forward the message
(UDP payload) to a SMS or E-mail destination.
Summary of Contents for NB224x
Page 42: ...User Manual NetBox Wireless Router 42 99 4 Jan 10 manual_netbox_e...
Page 64: ...User Manual NetBox Wireless Router 64 99 4 Jan 10 manual_netbox_e 3 1 8 4 2 Network Debugging...
Page 66: ...User Manual NetBox Wireless Router 66 99 4 Jan 10 manual_netbox_e 3 1 8 4 5 Restart...
Page 67: ...User Manual NetBox Wireless Router 67 99 4 Jan 10 manual_netbox_e 3 1 8 4 6 Tech Support...
