User Manual NetBox Wireless Router
22/99
4-Jan-10
manual_netbox_e
3.1.3.2
Mobile Interface
3.1.3.2.1
Administration
After the configuration (e.g. setting the APN), the mobile connection is enabled here. We recommend to use
the
„permanent‟ option. The UMTS/GSM LED is blinking during the connection establishment and goes on as
soon as the connection is up. See the troubleshooting section and log files if the connection does not come
up.
Parameter
Description
Administrative connection status:
This can be permanent, dial on demand or disabled. The on demand method
waits for traffic coming from the LAN going to the WAN.
The permanent method keeps up the mobile interface. In case of link loss the
connection is reestablished.
Redial attempts:
Number of redialing attempts before switching to the next profile.
Dial on demand idle timeout:
Time in minutes after that an idle connection will be disconnected when work-
ing with „dial on demand‟
Opeartional connection status:
Shows whether a connection is up or not.
Application area:
Choose mobile if NetBox is driving around. For stationary installation choose
„stationary‟.
Service type:
The preferred service type can be set here.
IP address:
IP address on mobile interface (ppp0) assigned by PPP server
Subnet mask:
Subnet mask on mobile interface (ppp0) assigned by PPP server
Summary of Contents for NB224x
Page 42: ...User Manual NetBox Wireless Router 42 99 4 Jan 10 manual_netbox_e...
Page 64: ...User Manual NetBox Wireless Router 64 99 4 Jan 10 manual_netbox_e 3 1 8 4 2 Network Debugging...
Page 66: ...User Manual NetBox Wireless Router 66 99 4 Jan 10 manual_netbox_e 3 1 8 4 5 Restart...
Page 67: ...User Manual NetBox Wireless Router 67 99 4 Jan 10 manual_netbox_e 3 1 8 4 6 Tech Support...
