background image

SitePlayer Telnet User’s Manual

42

DS 

Sets Siteplyer into Server mode and then exits AT command mode. You will not 
be able to re-enter AT command mode until SitePlayer is reset, power cycled or 
Force-AT-Command mode is initated. If you have multiple commands on a line 
this needs to be the last command.

DT

ip-address

[:

port

Connects to IP address 

ip-address

 which is in the form nnn.nnn.nnn.nnn using 

TCP/IP. You can optionally follow the 

ip-address

 with a port number. If 

port

 is 

not specified, the Telnet port in the Services web page (usually port 23) is as-
sumed. For example,

 

 

atdt45.92.253.1

 

 

ATDT192.168.2.123:45

DU

ip-address

[:

port

Sets up IP address 

ip-address

 which is in the form nnn.nnn.nnn.nnn to be the 

UDP serial IP address. If 

port

 is not specified, the UDP Serial port specified in the 

Services web page (usually port 10001) will be used. For example,

 

 

ATDU192.168.2.123

 

 

ATDU124.456.12.7:1002

E[

n

Controls whether characters typed in command mode will echo.

 

0 - Commands are not echoed.

 

1 - Commands are echoed as the are typed (default).

H[

n

Hang up (disconnect). The current TCP/IP connection is terminated.

I[

n

Display Identifier. Displays information of SitePlayer version (including the MAC 
address). If argument 

n

 is 1 then four IP addresses are displayed (Fixed IP 1, 

Fixed IP 2, DHCP and Link Local). For Example,

 

 

ATI

 

 

 

SitePlayer Telnet V1.2anm (00:03:75:7A:14:2C)

 

 

 

Copyright (C) 2001-2005 NetMedia, Inc.

 

 

 

OK

 

 

ATI1

 

 

 

43.61.1.231                                                                         

 

 

 

0.0.0.0                                                                         

 

 

 

192.168.2.10                                                                    

 

 

 

169.254.41.213                                                                  

 

 

 

OK    

O[

n

Go back online. You can issue this command to go back online (out of com-
mand mode) if a connection is still active. Argument 

n

 is ignored.

Q[

n

Controls whether or not a response to a command will appear.

 

0 - Responses to commands appear (either as verbose text or numeric respons-
es)

 

1 - Responses to commands don’t appear.

V[

n

Controls response verboseness.

 

0 - Responses are not verbose (they are numeric)

 

1 - Responses are verbose (they are text and this is the default)

Summary of Contents for SitePlayer Telnet Series





















































Reviews: