Delete All
To delete all the clients from access to this Access Point, just press
Delete All
without selecting the checkbox.
Reset
If you have made any selection, press
Reset
will clear all the select
mark.
Site Survey
Site survey displays all the active Access Points and IBSS in the neighborhood. When you are in the client
mode, you can select one AP to associate.
Press
Refresh
to get the latest information.
WDS Setting
To enable WDS function will let this AP enter “Bridge Mode”. Two APs in bridge modes can communicate with
each other through wireless interface. That is, two stations associated to different AP in bridge mode can
communicate with each other.
Enable WDS
Check the checkbox to enable WDS.
Add WDS AP
MAC Address
Enter the MAC Address for the new Access Point to participate the WDS
with this Access Point.
Apply Change
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since last time you press
Apply Change.
Current WDS AP List
The added Access Points for participating WDS with this Access Point
are shown.
Delete Selected
You can delete the WDS Access Points listed above by marking the
checkbox.
Delete All
You can delete all of the WDS Access Points listed above.
Reset
Press to discard the data you have entered since last time you press
Apply Change.
Pag 22