Netis WF-2409B Quick Installation Manual Download Page 13

Page: 13 / 16

WF-2409 Quick Installation Guide

3.1.3.

Static User

Figure 3-3

This item should only be used when users use a static IP address to access Internet, you should

input your “WAN IP address”, ”subnet mask”,” default gateway” and “DNS server (domain

name server) IP address” according to the information provided by your ISP. And every IP

address should be input in appropriate IP field, a IP address only divided into four IP octets by

sign”.” is acceptable.



IP address

The IP address that your Internet access into



Subnet mask

Specify a Subnet Mask for your WAN segment



Default gateway

It is provided by your ISP



Primary DNS

DNS server is used for resolve domain name. Your ISP will provides you with at least one DNS

IP address, input IP address of your DNS server in this field



Secondary DNS

Input IP address of backup DNS server, or you can leave this field blank.

Summary of Contents for WF-2409B

















Search results

Summary of Contents for WF-2409B

Reviews:

Related manuals for WF-2409B

Brands by name

Popular brands

Netis WF-2409B, Quick Installation Manual

Search results

Summary of Contents for WF-2409B

Reviews:

Related manuals for WF-2409B

Brands by name

Popular brands