WF-2409 Quick Installation Guide
3
1.
Hardware Installation Procedure
The procedures to install the WF-2409 please refer to Figure 1-1.
Figure 1-1
Step 1 connecting your computer to the LAN port.
Attach one end of the Ethernet cable with RJ-45 connector to your hub, switch or a computer’s
Ethernet port, and the other end to one of the LAN ports of your WF-2409.
Step 2 Connecting Cable/ADSL Modem to the WAN port.
Connect the Ethernet cable attaching to your Cable/ADSL modem to the WAN port of your
WF-2409.
Step 3 connecting the power adapter.
Connect the single DC output connector of the power adapter to the power jack on the side of
the WF-2409. Then plug the Power Adapter into an AC outlet.
Step 4 Power on the following devices in this order:
Cable/ADSL modem, Router, and PCs
2.
Login
You can manage the WF-2409 through the Web browser-based configuration utility. To
configure the device via Web browser, at least one properly configured computer must be
connected to the device via Ethernet or wireless network. The WF-2409 is configured with the
default IP
address of 192.168.1.1
and
subnet mask of 255.255.255.0
and its
DHCP server is
enabled
by default. Before setting up the Router, make sure your PCs are configured to obtain
