Wireless Access Point User manual
Page 32 of 32
Click “Apply” at the bottom of the screen to change the password.
If you forget your password, you’ll have to reset the AP to the factory
default (Password is “guest”) with the reset button (see AP’s front panel).
6.5.2 Restore Default / Restart System
Figure 37
Restore Default / Restart System
Restore the AP’s configuration to its factory default settings. Restore Factory
Defaults. To clear all of the AP’s settings and reset them to its factory defaults.
Click the Restore Default button. AP will restart automatically.
Restart System
Click "Restart System" button to reboot AP.
Figure 38
6.5.3 Firmware Upgrade
Upgrade the Broadband AP’s system firmware. To upgrade the firmware of your
Broadband AP, you need to download the firmware file to your local hard disk,
and enter that file name and path in the appropriate field on this page. You can
also use the Browse button to find the firmware file on your PC.
Figure 39
