Control and configuration
19
1. Open the window with command line
2. Enter the command
telnet 192.168.10.100 1234
(enter the address after the address of your device, replace
1234 with the port, which you have set for KSHELL on the device)
3. The device should list a response similar to the following:
100 HELLO EB5D61F6
. The last 8 characters comprise
the hash string used for encrypted login.
4. Now you can login with the command:
login name password
where
name
is the username and
password
is your password. If you have entered the correct username and
password, the device response is
250 OK
. You are now logged on and you can control the NETIO device using
the commands from the following chapter.
Every relay of communication via KSHELL interface has limited validity. In case of inactivity of approximate
duration one minute, the relay shall be terminated automatically. If you need to keep the relay active, you can
use the command
noop
.
5.3.3. Overview of control commands via KSHELL
login <name> <password>
User login with password in open format. Example: Using the command
login admin admin
you log in with the user name
admin
and password
admin
.
clogin <name> <crypted_password>
Login of user with crypted password.
version
Lists the firmware version.
alias
Lists the device name.
quit
Logout. In case of changes to the system settings, device restart is done.
reboot
Logs out, terminates the connection and restarts the device.
noop
Function for maintenance of the connection, no operation is executed. Suitable for use during
machine operation of the device.
uptime
Displays the time from the last start/restart.
Summary of Contents for 230C
Page 1: ......
