Troubleshooting
Problem
Cause
Solution
14
Ethernet Link LED is
OFF or intermittent
Normal/Uplink
push button is
in the wrong
position
•
Make sure the power cord is properly
connected at both ends.
•
Make sure that the cable plug is
properly inserted and locked into the
port at both the hub and the device.
•
Make sure all cabling is Category 5 and
meets the requirements for 10 Mbps
operation.
•
Check Link LEDs on attached Ethernet
devices or the network adapter cards.
•
If you are having trouble connecting
the XE602 to an Ethernet Hub or
switch; connect it to the port that
supports an uplink and press the uplink
button.
Port connection
is not
functioning
System not
Initializing
Power Line LED is
not ON
•
Recheck your connections and the
Power LED is ON.
•
Check the Normal/Uplink push button
on the front panel of the hub, switch or
router.
Incorrect Cable
used to connect
to the router
•
Exchange the supplied Ethernet patch
cable with the Ethernet crossover cable.
XE602 Qcard 5/7/02 10:24 AM Page 16
